About
Contacts
Feedback
Programs and Tutorials
Utilities
DSP Applications
EM Applications
Rect.Waveguides
Microstrip Antennas
Microwave Filters
Lange Coupler
Branchline Coupler
Directional Coupler
180 Deg.Hybrid C.
Mw. Power Dividers
Propagation
Downloads
Links
Site Map

Theoretical Information

Power dividers and combiners are used in microwave frequencies because of the different behavior of circuits. In microwave frequencies, the modeling of the circuits are different from the expected lumped model. Therefore, power dividers in microwave frequencies are not just resistive power dividers as in the low frequency or DC model. The important issues while using power dividers, are the specifications or properties of the dividers. In microwave frequency applications, for example power can be reflected from the output ports. Then to avoid the reflected power expected power divider should satisfy the maximum power transfer theory, which says the impedance of the load should be the complex conjugate of the impedance seen from the load end when load is not connected. This is called "matching" of the ports. This leads to transferring maximum power to the load and because of no reflection, avoid to burn out the power supply. Also, again for maximally transfer the power to the output ports, the network should not dissipate power and this property is called "losslessness". 

There are three types of dividers we analyze:

1-) WILKINSON  

2-) T-JUNCTION

3-) SPLIT-TEE

 


Please contact our Webmaster with questions or comments.
Webmaster: M. Irsadi Aksun